TM 10-4610-232-12
j. Connect wires from cables (1 and 2) to MOVs (8) and secure in accordance with the typical connection sketch.
k. Coat ground screws (61) with corrosion inhibitor paste and install ground wires (63 and 64) with screws (61) and
Iockwashers (62).
l. Apply varnish to all connections except terminal strip connections.
m. Install panel (6, Figure 4-39, sheet 1) and secure with capscrews (3),lockwashers (4) and washers (5).
Table 4-6. Distribution Pump External Electrical Panel Assembly Connections
4-161
