TM 10-4610-232-12
Figure 4-48. Cartridge Filter (Sheet 3 of 3)
d.
Install cover (31) and clamp (33). Close and tighten T-bolts (32) on clamps.
e.
Install brackets (30 and 29, Figure 4-48, sheet 1) and secure with 12 lockwashers (28), nuts (27), washers (26) and capscrews
(25).
INSTALLATION.
a.
Place cartridge filter assembly in position and secure with capscrews (22), lockwashers (23), and washers (24).
b.
Install gaskets (20 and 21) on pipe section (19) and connect pipe section (19) to filter assembly and eternal piping with clamp
(17) and clamp (18).
c.
Secure pipe section (19) to floor bracket with capscrews (12), lockwashers (13), washers (14), nuts (15) and washers (16).
d.
Install gaskets (8) on pipe section (7) and butterfly valve (6A) and secure with clamps (6) to external piping and filter assembly.
e.
Connect tubing to elbows (4 and 5) by tightening coupling nuts (3A and 4A).
f.
Close valves (1 and 2).
4-186 Change 12
