TM 10-4610-232-12
c.
I drain valves have mounting brackets (9, View 0) proceed as follows:
(1)
Remove the two capscrews (1), lockwashers (2) and washers (3) that hold the valve (5) to the bracket (9).
(2)
Remove valve (5) and if necessary remove fittings (4) from valve (5).
(3)
H necessary, remove two capscrews (6), lockwashers (7) and washers (8) and remove bracket (9).
Figure 4-49. Low Pressure Piping (Sheet 2 of 8) Pipe Sections and Manually Actuated Butterfly Block Valves
(MODEL WrA40 ONLY)
Change 7 4-190.1 / (4-190.2 Blank)
