TM 10-4610-232-12
REMOVAL - THERMOMETER.
a. Turn nut (1, View T) on thermometer to remove it from fitting (2).
b. If necessary, unscrew fitting (2) from pipe section (3).
REPAIR - THERMOMETER.
Replace damaged or inaccurate thermometer.
INSTALLATION - THERMOMETER.
a.
Apply antiseize tape and screw fitting (2) into pipe section (3).
b.
Apply antiseize tape and tighten nut (1) on thermometer into fitting (2).
Figure 4-49. Low Pressure Piping (Sheet 6 of 8)Thermometer and Flow Sensor
(MODEL WA6CO0 ONLY)
4-196 Change 7
