TM 10-4610-232-12
4-46. BASKET STRAINER. This task covers: (MODEL WTA-060 ONLY)
a.
Removal
b.
Disassembly
c.
Repair
d. Reassembly
e. Installation
INITIAL SETUP:
Tools, see Appx B, Sec III, Ref Code (No.):
Equipment Condition:
Tool Kit, General Mechanics Automotive (1)
ROWPU shutdown.
Strainer drained, top pipe removed
Materials/Parts:
(para. 3-22).
Preformed Packings (TM 10-4610-232-24P)
Gaskets (M 10-4610-232-24P)
Lockwashers (TM 10-4610-232-24P)
Washers (TM 10-4610-232-24P)
REMOVAL
a. Remove clamp (1, Figure 4-50, sheet 1).
b. Remove capscrew (2), washers (3) and locknut (3A), and remove clamp (4) and rubber cushion (5) from bracket
(11).
c. Lift and remove strainer assembly (6).
d. Remove gasket (7).
DISASSEMBLY.
a. Remove piping around basket strainer, if bracket (11) removal is necessary (para. 4-45).
b. Remove four capscrews (8), lockwashers (9) and washers (10) and remove bracket (1 1), if necessary.
c. Remove clamp (12, Figure 4-50, sheet 2).
d. Lift basket strainer assembly (13) from strainer case (14).
e. Unscrew cap (15) and remove gasket (16). Remove overscreen (17).
f. Remove gasket (18) and preformed packing (19).
REPAIR.
a. Replace any damaged or missing gaskets and preformed packing.
b. Replace inner strainer (20) or overscreen (17) if damaged.
Figure 4-50. Basket Strainer (sheet 1 of 2)
(MODEL WTA-060 ONLY)
Change 7 4-197
