T M 1 0 - 4 6 1 0 - 2 3 2 - 12
4-91. PORTABLE FLOW RATE INDICATOR. This task covers:
a. Disassembly.
b. Repair.
c. Reassembly.
Tools, see Appx B, Sec Ill, Ref Code (No.):
Equipment Condition:
Tool Kit, General Mechanics (1)
ROWPU in normal operation.
Portable flow rate indicator disconnected from
product to storage hose (para. 2-35b).
a. Loosen the clamping screw (1, Figure 4-105) on each of the two strap damps (2) and remove the strap damps
(2).
b. Pull the flow rate gage (3) straight out of the plastic pipe assembly (4).
c. Do not disassemble the plastic pipe assembly (4).
a. Replace cracked or unserviceable pipe assembly (4).
b. Replace damaged or inoperative flow rate gage (3).
c. Replace worn or broken strap damps (2).
a.
b.
c.
NOTE
Arrow on flow rate gage must be positioned on pipe assembly in direction of flow.
Position flow rate gage (3) on pipe assembly (4) as shown in Figure 4-105.
Wrap strap damps around the pipe assembly and over the flanges at each side of the flow rate gage (3).
Tighten the screws (1) on the strap damps (2).
Figure 4-105. Portable Flow Rate Indicator
4-314
