TM 10-4610-232-12
4-93. SLING BRACKET ASSEMBLY. This task covers:
a. Removal.
b. Disassembly.
c. Repair.
d. Reassembly.
e. Installation.
Tools, see Appx B, Sec Ill, Ref Code (No.):
Equipment Condition:
Tool Kit, General Mechanics (1)
Access panel on top of van removed (para. 4-74).
Materials/Parts:
General Safety Instructions:
Lockwashers (TM 10-4610-232-24P)
Washers (TM 10-4610-232-24P)
WARNING
Observe specific Warning in text.
WARNING
To avoid injury to personnel, hold plate securely prior to removing all fasteners.
a. Remove four capscrews (1, Figure 4-107), Iockwashers (2) and washers (3).
b. Remove mounting plate (4).
Remove four capscrews (5), Iockwashers (6), washers (7) and remove straps (8).
Replace or repair worn or defective straps.
Fasten straps (8) on plate (4) and secure with capscrews (5), Iockwashers (6) and washers (7).
a. Lower and hold plate (4) into position.
b. Secure by installing capscrews (1), Iockwashers (2) and washers (3).
Figure 4-107. Sling Bracket Assembly
4-318
