TM 10-4610-239-10
TM 08580B-10/1
(1)
Fill 107 ml measure HALF-FULL with liquid polymer chemical (there is no half-full mark on measure).
(2)
Pour liquid chemical into POLYMER pail.
(3)
Add brine (if available) or raw water up to the 3-gallon mark.
(4)
Stir with wooden paddle for at least a minute.
(5)
Pour solution into 5-gallon container marked POLYMER.
x.
Mix Chlorine Solution:
(1)
Pour 3 gallons of brine into unmarked pail.
(2)
Fill CALCIUM HYPOCHLORITE measure with 0.2 pounds (91 grams) of calcium hypochlorite.
WARNING
Mark one pail for chlorine use only. DO NOT use for other chemicals.
(3)
Pour calcium hypochlorite into pail marked CHLORINE.
(4)
Pour brine (if available) or raw water from unmarked pail into CHLORINE pail.
(5)
Stir with wooden paddle for 1 minute.
NOTE
Mixing calcium hypochlorite with water produces a chlorine solution. It is normal to see
white particles in the solution.
(6)
Pour solution into 5-gallon container marked CHLORINE.
WARNING
Make sure all tubing connections are secure on pump, valves, and containers.
y.
Mix sodium hexametaphosphate (sodium hex):
(1)
Pour 0.1 pounds (45 grams) of sodium hex into SODIUM HEX measure.
(2)
Put sodium hex into pail marked SODIUM HEX.
(3)
Add brine (if available) or raw water to pail marked SODIUM HEX to the 3-gallon mark.
(4)
Stir with wooden paddle for 1 minute.
(6)
Pour solution into 5 gallon container marked SODIUM HEX.
2-51
