TM 10-4610-239-10
TM 08580B-10/1
Figure 2-39. Ground Rod In Stowed Position
NOTE
If driving gets too hard, soak the earth and try driving rod until 8 feet of rod is in the
ground. If this does not work initially, continue alternately soaking ground and driving rod.
If unable to get 8 feet of rod into the soil, then keep soil moist around the rod for the
duration of the operation.
ad.
Unwind the power cables of each pump. Pull the cables to the ROWPU junction box and unscrew the covers
of the connectors. Attach pump cables to the connectors shown in fig. 2-40. Plug the power cable from the power source
into J1, if not already installed.
2-53
