TM 10-4610-239-24
TM 08580B-24/3
39.
CHEMICAL FEED METERING PUMP CHLORINE DRIVE UNIT. Adds chlorine to product water to prevent
bacteria growth.
40.
REGULATE PRODUCT FLOW VALVE. Controls rate of product water flow to product water tanks.
41.
CHECK VALVE. Prevents backflow in product water line.
42.
PRODUCT WATER FLOW GAGE. Indicates rate of product water flow to product water tanks.
43.
WATER METER. Totalizer type meter. Indicates total amount of potable water produced by ROWPU.
44.
IN-LINE TDS MONITOR. Indicates quality of product water. Calibrated in total dissolved solids (TDS). Sensor is
installed in product water line. Meter is an overpack item installed on control panel during ROWPU operations.
45.
PRODUCT WATER TANKS (2). Store product water.
46.
VALVE. Controls flow of product water from first product water tank to second.
47.
DISTRIBUTION NOZZLE. Controls rate of flow of product water from product water tanks to user.
48.
CHEMICAL/RADIOLOGICAL FILTERS. Overpack items used to remove chemical or radiological contaminants
from product water. Overpack contains all hardware and tubing needed to connect both filters in series between
the two product water tanks. Only installed when needed. Operating life is 100 hours for either type.
1-7/(1-8 blank)
