TM 10-4610-239-24
TM 08580B-24/3
c.
Remove tight broken studs or screws as follows:
(1) Center punch broken stud or screw.
(2) Drill three quarters way deep into broken stud or screw using a drill 'bit 1/16 inch less the diameter of
the broken stud or screw.
(3) Using a screw extractor, remove broken stud or screw.
d. Remove studs or screws that have not broken flush to surface as follows:
(1)
Clamp broken stud or screw using vise grip pliers.
(2)
Back out broken stud or screw.
2-54
