TM 10-4610-239-24
TM 08580B-24/3
INSTALLATION. (Cont)
a.
Position inner bearing cup (18) in hub (12).
b.
Lay brass drift pin (19) across top of inner bearing cup (18).
c.
Using hammer, tap brass drift pin (19), move brass drift pin to another position on inner bearing cup (18), then tap
again. Repeat until inner bearing cup is seated completely inside hub (12).
d.
Turn over hub and drum assembly (15) and repeat steps a thru c for outer bearing cup (11).
e.
Install new seal (17) and inner wheel bearing (16) on spindle (14).
2-135
