TM 10-4610-239-24
TM 08580B-24/3
INSTALLATION. (Cont)
NOTE
If tire and wheel assembly was removed from hub and drum
assembly, go to step f.
If tire and wheel assembly was not removed from hub and drum
assembly, go to step i.
f.
Position tire and wheel assembly (20) on wheel lift truck.
g.
Position hub and drum assembly (15) in tire and wheel assembly (20).
h.
Install six lug nuts (21) and torque lug nuts to 250 pound-feet (339 N.m.)
i.
Push wheel lift truck with tire and wheel and hub and drum assembly (9) toward trailer so that hub (12) goes on
spindle (14) without being forced.
NOTE
To ease installation of outer bearing cone and rollers, rock top and
bottom of tire and wheel and hub and drum assembly on spindle while
pushing in on bearing cone and rollers.
j.
Install outer bearing cone and rollers(13) in hub (12).
k.
Install tongue washer (8) and inner spindle nut (7). Tighten inner spindle nut fingertight.
l.
Lower lift arms of wheel lift truck clear of tire and wheel and hub and drum assembly (9) and move wheel lift truck
away from trailer.
ADJUST BEARINGS.
2-136
