TM 10-4610-239-24
TM 08580B-24/3
INSTALLATION. (Cont)
STRAP AND NIPPLE (Cont)
a. Apply antiseize tape to nipple threads and install ring filler (10), Nomex tape (11), and nipple (9).
b. Position two-piece clamp (4) in back of control panel (12) on ring filler (10).
c.
Install two screws (3), flat washers (2 , and nuts (1). Do not tighten screws.
)
d. Install two screws (8), flat washers (7), new lockwashers (6), and nuts (5).
e. Tighten all screws.
TUBE SUPPORT
CAUTION
Piping can be badly damaged by corrosion if it contacts tube
support. Be sure that Nomex tape separates piping and tube
support.
a. Wrap tubes (6) with Nomex tape (5).
b. Position two pieces of tube support (4) on tubes (6) (with Nomex tape separatingtube support and tubes)
and install two screws (3), new lockwashers (2), and nuts (1).
2-228
