TM 10-4610-239-24
TM 08580B-24/3
DISASSEMBLY. (Cont)
d.
Loosen rotary fasteners (9) and open junction box cover (2). Remove retainer washers (6) and rotary fasteners (9).
e.
Remove rivets (12), hinge (5), junction box cover (2), and gasket (1).
f.
Drill out rivets (13) and remove speed nuts (7) from junction box cover (2).
ASSEMBLY.
a.
Cut gasket material (1) and, using adhesive, glue gasket material (1) and information/wiring diagram (14) on door
(3).
b.
Punch seven holes through gasket material (1) for wing screws (10).
c.
Position hinge (4) on door (3) and install rivets (11).
d.
Position seven wing screws (10) on door (3) and install retaining washers (8) on wing screws (10).
e.
Cut gasket material (1) and, using adhesive, glue gasket material (1) on junction box cover (2).
f.
Punch 13 holes through gasket material (1) at for rotary fasteners (9).
g.
Position 7 speed nuts (7) and install 14 rivets (13) on junction box cover (2).
h.
Position hinge (5) on junction box cover (2) and install rivets (12).
i.
Position 13 rotary fasteners (9) and install retaining washers (6).
j.
Position door (3) and hinge (4) on junction box cover (2) and install rivets (11) on hinge (4) and junction box cover
(2).
2-291