TM 10-4610-239-24
TM 08580B-24/3
2-135. REPLACE BACKWASH PUMP STRAINER ASSEMBLY.
This task covers:
a. Removal.
b. Installation.
INITIAL SETUP.
a.
Tools. Tool Kit (Appx B, Sect III, Item 10).
b.
Equipment Condition.
Generator shut down (power source manual).
ROWPU shut down (TM 10-4610-239-10).
REMOVAL.
a.
Remove two nuts (1), lockwashers (2), flat washers (3), and bolts (4).
b.
Remove backwash pump strainer assembly (5).
INSTALLATION.
a.
Position backwash pump strainer assemby (5) on frame (6) and align mounting holes.
l
b.
Install two bolts (4), flat washers (3), lockwashers (2), and nuts (1).
2-333
