TM 10-4610-239-24
TM 08580B-24/3
DISASSEMBLY.
a.
Loosen jamnut (1) away from clevis (2).
b.
Remove clevis (2) and jamnut (1).
WARNING
Spring is under tension inside chamber. Sudden release of tension can
cause personal injury and damage from flying objects. Release tension
slowly.
c.
Remove two bolts (3), nuts (4), and clamp (5).
d.
Use screwdriver to gently separate chamber (7) from adapter (13) as these are stuck together by
the diaphragm (6).
e.
Remove diaphragm (6).
f.
While one person secures chamber (7) in vice and spring (8) to prevent sudden elease of spring
r
tension, second person slowly turn nut (9) counterclockwise to release all tension on spring.
g.
Slowly turn spring seat (10) on end of stud assembly (11) and remove stud assembly, nut (9),
washer (12), spring (8), and chamber (7).
WARNING
Spring is under tension inside housing assembly. Sudden release of
tension can cause personal injury and damage from flying objects.
Release tension slowly.
h.
While holding adapter (13) firmly against housing assembly (14), remove two nuts (15), botls
(16), and clamp (17).
i.
Slowly release spring tension by allowing adapter (13) to separate from housing assembly (14).
j.
Remove diaphragm (18), push rod (19), and return spring (20).
WARNING
Spring is under tension between adapter and plate. Sudden release of
tension can cause personal injury and damage from flying objects. Hold
tension on spring manually while removing screw.
k.
While holding tension on spring (21) by pressing down on plate (22), remove screw (23).
l.
Slowly release tension and remove plate (22), spring (21), and performed packing (24). Discard
performed packing.
m.
Turn adapter (13) over and remove push rod adapter (25) and plate (26).
n.
Remove screw (27) and plate (26).
3-92
