TM 10-4610-239-24
TM 08580B-24/3
3-26. REPAIR FRAME.
INITIAL SETUP.
a. Tools.
Tool Kit (Appx B, Sect III, Item 10).
Vernier Caliper (Appx B, Sect m, Items 6 and 9).
Tap Wrench (Appx B, Sect III, Item 7).
Portable Electric Drill (Appx B, Sect III, Items 6 and 9).
Standard Insert Repair Kit (Appx B, Sect III, Items 2 and 9).
Oversize Insert Repair Kit (Appx B, Sect III, Items 2 and 9).
Swage Tool Stop (Appx B, Sect III, Items 2 and 9).
b. Materials/Parts.
Drycleaning Solvent (Appx C, Sect II, Item 16).
Transmission Oil (LO 5-4610-215-12).
Rags (Appx C, Sect II, Item 13).
c.
General Safety Requirements.
WARNINGS
Compressed air can blow dust into the eyes. Wear eye
protection. Do not exceed 30 psig (207 kPag) air pressure.
Drycleaning solvent AA 711 TYPE I & II is highly toxic and
can ignite organic materials, nitrates, carbides, and chlorates.
Wear eye, skin, and respiratory protection. Use in a well-
ventilated area.
For standard procedures for removal, cleaning, inspection, and installation, refer to Chapter 2, Section VI, of
this manual.
For welding procedures, refer to TM 9-237.
For repair of metal bodies, refer to TM 9-450.
3-141
