TM 10-4610-239-24
TM 08580B-24/3
ASSEMBLY.
NOTE
Booster pump and distribution pump are assembled the same.
Booster pump is shown.
a. Install slinger (13) on shaft of electric motor (14).
b. Install plug (19) to bronze adapter (17).
c.
Install bracket (18) and bronze adapter (17) to motor (14).
d. Install two bottom lockwashers (9), washers (10), and bolt (11).
e. Install two bolts (12) at top.
CAUTION
Seal assembly must be installed in casing with raised end first.
f.
Install mechanical seal (7) into bronze adapter (17).
g. Install O-ring (8) to impeller (6).
h. Install impeller (6) on shaft of electric motor (14).
i.
Insert blade of screwdriver in shaft slot (5).
j.
Install washer (16) and acorn nut (15).
k.
Position gasket (3) in cover and cover (2) on casing (10). Install four bolts (1).
1. Install cap (4).
TEST.
a. Secure motor to test bench.
WARNING
Electrical high voltages can cause serious injury or death.
Some tests require power to be connected. Always take proper
measures to ensure personal safety.
b. Connect motor wiring to test bench leads.
c.
Connect power and run motor with and without load.
d. Check motor for excessive vibration and fast temperature rise.
e. Disconnect motor from test bench leads.
3-148
