TM 10-4610-239-24
TM 08580B-24/3
REMOVAL. (Cont)
d.
Remove adapter assembly (6).
e.
Slide baffle disc (7) off knurled surface (8) of plunger (9).
CAUTION
Nicks on the plunger body will cause packing ring failure. Use tools only
on plunger knurled surface to prevent damage to equipment.
f.
Using wrench, remove plunger (9) from crossheads (10) in R.O. pump power frame assembly.
g.
Remove baffle disc (7) from plunger.
NOTE
There are five adapter assemblies. All are separated the same. One is shown.
Record sequence of components in packing kit for installation.
Packing kit components may separate during removal of stuffing box nut.
h.
Using spanner wrench, remove stuffing box nut (11).
i.
Remove packing kit (12) and throat bushing (13) from adapter (14). Discard packing kit.
CLEANING.
a.
Wash plungers, baffle discs, stuffingbox nuts, throat bushings, and adapters with mild soap solution.
3-237
