TM 10-4610-239-24
TM 08580B-24/3
DISASSEMBLY.
a.
Remove two nuts (1), lockwashers (2), flat washers (3), screws (4), flat washers (5), retaining strap (6), ad
n
mounting plate (7).
b.
Remove cap (8), adapter (9), brass ring (10), and pipe (11).
c.
Remove hose plug (12), swivel adapter (13), and brass ring (14).
d.
Loosen yoke screw (15) to relieve pressure on cover (16).
e.
Remove two screws (17) and yoke (18).
f.
Remove cover and preformed packing (19).
g.
Remove strainer basket (20) and pipe plug (21).
CLEANING.
a.
Flush foreign matter from strainer body and strainer basket with water.
b.
Using mild soap solution and stiff-bristled brush; clean straine basket, strainer body, gasket mounting surfaces,
r
and all attaching parts.
c.
Rinse items with water and air dry.
d.
Using steel brush; clean corrosion from strainer body, retaining strap, mounting plate, yoke, and cover.
INSPECTION.
a.
Inspect strainer body, yoke, cover, mounting plate, and retaining strap for cracks, condition of threads, and
serviceability. Replace parts as required.
b.
Inspect strainer basket for tears, holes, and dents. Replace as required.
c.
Inspect plugs, cap, adapters, ppe, and screws for damaged threads. Replace as required.
i
d.
Inspect preformed packing for cracks and breaks. Replace as required.
ASSEMBLY.
NOTE
Apply antiseize tape to all male pipe threads before assembly.
a.
Install pipe plug (21).
b.
Position strainer basket (20) in strainer body (22).
c.
Position preformed packing (19) on cover (16) and install cover.
d.
Position yoke (18) on strainer body (22).
e.
Install two screws (17).
3-253
