TM 10-4610-239-24
TM 08580B-24/3
4-2. REPAIR ROWPU AND FLATBED CARGO TRAILER.
This task covers:
a. Removal of ROWPU from flatbed cargo trailer.
b. Disassembly.
c. Cleaning.
d. Inspection.
e. Repair.
f. Assembly.
g. Installation of ROWPU on flatbed cargo trailer.
h. Test.
INITIAL SETUP.
a.
Tools.
General Mechanics Tool Kit (Appendix B, Section III, Item 4).
Hoisting sling (10 ton minimum capacity)
Crane or lifting device (10 ton minimum capacity)
b.
Personnel Required.
4
c.
Materials/Parts.
Adhesive (Appendix C, Section II, Item 21)
Lockwasher (16) - MS35338-50
d.
Equipment Condition.
ROWPU prepared for movement; all loose accessories removed
(TM 10-4610-239-10).
Landing jacks set (TM 10-4610-239-10).
Generator set removed (paragraph 3-63).
e.
General Safety Instructions.
WARNING
Required weight of ROWPU is 11,380 pounds (6 tonnes). To prevent injury
to personnel and damage to the equipment, use proper lifting equipment
rated at 10 tons (9.1 tonnes) or greater.
Lack of attention or being in an improper position during lifting operation can
result in serious injury or death. Pay close attention to movements of
equipment being lifted. Do not stand under or in a position where you could
be pinned against another object. Watch your footing.
NOTE
This task gives procedures for repair of ROWPU and flatbed cargo trailer.
Use only those procedures that apply to the equipment being repaired. Only
those items on frames that have damage and require maintenance actions
shall be repaired. Repairs of all assemblies shall be done unless a new or
stocked assembly will be installed.
Each unit shall be tested in accordance with the test procedures given after
each repair.
Follow the procedures given in TM 38-230-1/-2 for
preservation, packaging, and packing of military supplies and equipment
after test is complete.
4-2
