TM 10-4610-239-24
TM 08580B-24/3
DISASSEMBLY. (Cont)
g.
Remove low-pressure switch. Refer to paragraph 2-83.
h.
Remove high-pressure switch. Refer to paragraph 2-85.
i.
Remove multimedia filter control valve. Refer to paragraph 2-86.
j.
Remove diaphragm valve assembly. Refer to paragraph 2-87.
k.
Remove backwash timer assembly. Refer to paragraphs 2-90 ( ulligan) and 2-91 (MECO).
C
l.
Remove R.O. pressure tubes. Refer to paragraph 2-92.
m.
Remove all piping. Refer to paragraph 2-94.
n.
Remove vent vessels gate valve. Refer to paragraph 2-95.
o.
Remove raw water flowmeter. Refer to paragraph 2-97.
p.
Remove brine water flowmeter. Refer to paragraph 2-98.
q.
Remove backwash water flowmeter. Refer to paragraph 2-99.
r.
Remove backwash valve. Refer to paragraph 2-100.
s.
Remove product water flowmeter. Refer to paragraph 2-102.
t.
Remove cartridge filter, multimedia filter, and R.O. vessels differential pressure gages. Refer to paragraph 2-
103.
u.
Remove R. O. pressure gage. Refer to paragraph 2-104.
v.
Remove water meter. Refer to paragraph 2-105.
w.
Remove needle valve. Refer to paragraph 2-106.
x.
Remove seven drain ball valves. Refer to paragraph 2-107.
y.
Remove product water check valve. Refer to paragraph 2-108.
z.
Remove relief valve. Refer to paragraph 2-109.
aa.
Remove backwash check valve. Refer to paragraph 2-110.
ab.
Remove four elliptic valves. Refer to paragraph 2-111.
ac.
Remove four ball valves. Refer to paragraph 2-112.
ad.
Remove cartridge filter, pulse dampener, and multimedia filter vent valves. Refer to paragraph 2-113.
ae.
Remove chemical feed metering pump stand, brackets, and mounting plate. Refer to paragraph 2-117.
af.
Remove R.O. pump and motor stand. Refer to paragraph 2-129.
4-5
