TM 10-4610-240-24
TM 08580C-24/2
TO 40W4-13-22
2-4. SITE AND SHELTER REQUIREMENTS.
When not in use, the ROWPU does not require special siting or shelter If shelter Is available, storing the ROWPU under
cover will minimize routine maintenance For site and shelter requirements during routine operation, refer to TM 10-4610-
240-10
2-5. SERVICE UPON RECEIPT OF MATERIEL.
a. Checking Unpacked Equipment.
(1) Inspect the equipment for damage incurred during shipment If the equipment has been damaged, report
the damage on DD Form 6, Packaging Improvement Report. Marine Corps personnel refer to MCO
4430.3
(2) Check the equipment against the packing slip to see if the shipment is complete Report all discrepancies in
accordance with the instructions of DA Pam 738-750 Marine Corps personnel refer to TM 4700-15/1 (3)
Check to see whether the equipment has been modified
b. Deprocesslng Unpacked Equipment.
(1) Remove all preservative coatings, grease, tape and packing materials
CAUTION
To prevent damage to equipment, do not operate R.O pump or chemical feed pump on
preservative oil Pumps must be serviced with correct operating oil during deprocessing
(2) Drain shipping fluid from R 0. pump and chemical feed pumps Service pumps with fresh oil in accordance
with LO 10-4610-240-12.
2-6. INSTALLATION INSTRUCTIONS.
For installation Instructions, refer to TM 5-4610-215-10/2
Section III. UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
Paragraph Title
Paragraph
Preventive Maintenance Checks and Services ....................................................................................................... 2-7
2-7. PREVENTIVE MAINTENANCE CHECKS AND SERVICES.
a. General
2-2
