TM 10-4610-240-24
TM 08580C-2412
TO 40W4- 13-22
3-8. CABLE ASSEMBLY (RAW WATER PUMP) MAINTENANCE.
This task consists of
a. Inspection
b. Disassembly
c. Repair
d. Assembly
e. Test
INITIAL SET-UP:
Tools Required
General Mechanics Tool Kit (Appendix B, Section III, Item 4)
Soldering Gun Kit (Appendix B, Section III, Item 3).
Multimeter (Appendix B, Section III, Item 3).
Electrical Repair Kit (Appendix B, Section III, Item 3)
Crimping Tool (Appendix B, Section III, Item 3)
Wire Stripper (Appendix B, Section III, Item 3)
Materials/Parts Required
Tape, Electrical (Appendix C, Section II, Item 31)
Solder (Appendix C, Section II, Item 27)
Equipment Condition
Reference
ROWPU shutdown (TM 104610-240-10).
Cable assembly removed (para 2-21).
INSPECTION
For inspection procedures, refer to paragraph 3-20.
DISASSEMBLY
For disassembly procedures, refer to paragraph 3-20.
TEST.
For test procedures, refer to paragraph 3-20.
ASSEMBLY
For assembly procedures, refer to paragraph 3-20.
REPAIR.
For repair procedures, refer to paragraph 3-20.
3-90
