TM 10-4610-240-24
TM 08580C-2412
TO 40W4-1s22
3-6.
WIRING HARNESS W1 MAINTENANCE - continued.
TEST
CAUTION
The following tests are performed to determine if the wiring harness is defective. Before
testing, wiring harness must be disconnected. Failure to disconnect wiring harness can
result in false test indications.
Make sure wire terminals are not touching each other.
NOTE
Refer to wiring diagram in Appendix F for wiring harness being tested.
a.
Using multimeter, test for continuity between pins (2) and wire terminals (3).
b.
If continuity does not exist between any two points, replace de raged or faulty wire.
3-268
