TM 104610-241-10
TO 40W4-13-41
2-7. ROWPU ASSEMBLY AND PREPARATION FOR USE - cont.
j.
Install 1 1/2-inch and 2-inch Gate Valve Quick Disconnect Fittings. Refer to figure 2-31.
NOTE
During installation, apply antiseize tape (from storage chest) to pipe threads of quick disconnect
fittings.
(1)
Install one 2-inch female quick disconnect fittings on each end of the 2-inch gate valve.
(2)
Install a 1 1/2-inch female quick disconnect fitting on the 1 1/2-inch gate valve.
(3)
Install one 2-inch male quick disconnect fitting on the other end of the 1 1/2-inch gate valve.
Figure 2-31. Gate Valve Quick Disconnect Fittings.
2-57
