TM 10-4610-241-24
TO 40W4-13-42
2-73.
JUNCTION BOX ASSEMBLY REPAIR.
This task consists of:
a.
Disassembly
b.
Cleaning
c.
Inspection
d.
Repair
e.
Assembly
INITIAL SET-UP:
Tools Required
General Mechanics Tool Kit (Appendix B, Section III, Item 4)
Rivet Tool (Appendix B, Section III, Item 3)
Electric Drill (Appendix B, Section III, Item 3)
Drill Set (Appendix B, Section III, Item 3)
Retaining Ring Pliers (Appendix B, Section III, Item 3)
Material/Parts Required
Adhesive (Appendix C, Section II, Item 1)
Detergent (Appendix C, Section II, Item 5)
Lockwashers, Rivets and Gaskets (TM 10-4610-241-24P)
Personnel Required
Two
Equipment Condition
Reference
Power shut down (Power Source Manual).
General Safety Instructions
WARNING
Lifting heavy/difficult to handle equipment incorrectly can cause
serious injury. Use two personnel when removing junction box
cover assembly.
To prevent injury or death to personnel, verify that electrical power is
off before working injunction box.
a.
Disassembly.
(1)
Junction box cover.
(a)
Turn thirteen rotary fasteners (1) and open junction box cover (2).
WARNING
Junction box cover is difficult to handle. Two people are needed to lift it
to prevent personal injury or damage to equipment.
CAUTION
To prevent damage to junction box wiring, lift and support wiring off
bottom of junction box when removing (drilling) rivets. Remove all rivet
fragments and metal chips to prevent short circuits in wiring.
(b)
Lift and support wiring.
2-284
