TM 10-4610-241-24
TO 40W4-13-42
2-81. TRAILER CABLE ASSEMBLY REPLACE (WPES-10 AND H-9518-1) - continued.
c.
Test.
NOTE
To prevent false indications it is necessary to disconnect cable assembly at one end
before performing the continuity tests and at both ends to check it for shorts.
(1)
Check cable assembly for continuity between individual connectors and corresponding pin on multiple
connector (See table below).
Multiple Pins Connector Pin Number
Individual Connectors
K
37
J
22-460
D
90A
F
23
E
21
C
24-483
B
22-461
A
24-484
(2)
If continuity is absent in any test, refer cable assembly to Direct Support Maintenance.
(3)
Check wiring harness for short as indicated in following table.
Multiple Pins Connector Pin Number
Individual Connectors and Shell
K
Each Individual Connector and
Multiple Connector Shell
J
(As above)
D
(As above)
F
(As above)
E
(As above)
C
(As above)
B
(As above)
A
(As above)
2-320 Change 1
