TM 10-4610-241-24
TO 40W4-13-42
Table 3-1. Direct Support Troubleshooting- continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
CHEMICAL FEED PUMP - continued
d.
If continuity does not exist through cable assembly, W-52, repair cable. Refer to Paragraph 3-27.
e.
If continuity does not exist through K7 contacts and/or 450-600 Ohms is not measured between Al
and A2, replace motor starter. Refer to Paragraph 3-61.
f.
If continuity does not exist through wires, tighten loose connections and/or replace defective wires.
3-41
