ARMY TM 10-4610-309-14
MARINE CORPS TM 10802A-14/1
0050 00
TACTICAL WATER PURIFICATION SYSTEM (TWPS)
UNIT MAINTENANCE PROCEDURES
DIESEL ENGINE AND FUEL TANK ASSEMBLY
Muffler Assembly Replacement:
Parts (TM 10-4610-309-24P):
Muffler assembly
Gasket
Replace the muffler assembly as follows (see Figure 10):
WARNING
If the engine has been running, the muffler may be hot. Allow the muffler to cool
before handling. Failure to observe this warning can result in burns.
1. Remove the fuel tank assembly. Refer to REPLACE and Diesel Engine.
2. Unbolt and remove the exhaust shield plate from the top of the muffler assembly.
3. Remove the two nuts and the two bolts that attach the muffler assembly to the engine. Remove
and discard the muffler assembly.
4. Scrape any remaining gasket material off the cylinder head.
5. Attach the new gasket and muffler assembly using the two nuts and two bolts.
6. Install the exhaust shield plate on the top of the muffler assembly with two bolts.
7. Install the fuel tank assembly.
EXHAUST SHIELD PLATE
MUFFLER
ASSEMBLY
NUTS
GASKET
BOLTS
Figure 10. Muffler Assembly Replacement.
0050 00-11
