ARMY TM 10-4610-309-14
MARINE CORPS TM 10802A-14/1
0063 00
TACTICAL WATER PURIFICATION SYSTEM (TWPS)
UNIT MAINTENANCE PROCEDURES
POWER DISTRIBUTION SYSTEM
POWER DISTRIBUTION PANEL
DIN RAIL HOLDING CLIP
SURGE ARRESTER ASSEMBLY
SURGE ARRESTER ASSEMBLIES (27)
Figure 7. Surge Arrester Assembly Replacement.
2. Install the new surge arrester as follows:
a. Position the new surge arrester on the DIN rail.
b. Carefully press the surge arrestor in place on the DIN rail.
c. Insert the wires in the screw/plug connections in accordance to the wire tags.
d. Replace the busbar jumper at the bottom of the surge arrestor.
e. Tighten the screw connections to secure the wires and busbar jumper.
f. Remove the wire tags if necessary.
g. Close the power distribution panel.
0063 00-14
