ARMY TM 10-4610-309-14
MARINE CORPS TM 10802A-14/1
0068 00
TACTICAL WATER PURIFICATION SYSTEM (TWPS)
DIRECT SUPPORT MAINTENANCE PROCEDURES
DIESEL ENGINE
14. Install the new crankcase gasket and the crankcase cover on the engine.
15. Tighten the bolts in the sequence shown in Figure 11.
a. Torque bolts 1 through 14 to 95-113 in-lbs.
b. Torque bolt 15 last to 226-243 in.-lbs.
5
1
11
13
3
9
8
14
10
7
4
2
12
15
6
Figure 11. Crankcase Cover Bolt Tightening Sequence.
16. Install the cylinder head onto the engine as described earlier in this work package.
17. Install the following components onto the engine (WP 0050):
a. Fuel pump assembly
b. Fuel injection valve
c. Muffler assembly
d. Cooling fan case assembly
18. Make sure the oil drain plug is reinstalled.
19. Put approximately qt. oil in the engine.
20. Install the pump and adapter onto the engine (WP 0050).
21. Install the engine pump assembly onto the pump skid frame (WP 0050).
22. Slowly pull the recoil starter rope out past the skid frame and thread it through the rope guide.
END OF WORK PACKAGE
0068 00-13/14 BLANK
