TM 10-4610-310-14
0097 00
INSTALLATION
1. Refer to Figure 1 for this procedure section.
2. Install the rubber bushings (4) if necessary.
3. Place the tank on the module. Support the tank from the bottom if necessary.
4. Secure the tank with bolts (2), washers (3), nuts (8) and washers (7).
5. Install fuel return line (6) on the tank (1) and tighten clamp (5).
6. Install fuel gauge (9) on tank (1) by firmly pushing the gauge into the hole until seated.
7. Install fuel filter. See WP 0093 00.
8. Install fuel strainer. See WP 0093 00.
END OF WORK PACKAGE
0097 00-3 / 4 blank
