TM 10-4610-310-14
0126 00
INSPECTION
Inspect all the components for damage or deformity. Replace if needed.
ASSEMBLY
1.
Install screw (13) onto control handle (6). See Figure 1.
2.
Install handle to the assembly (3) and install screw (9), knob (10), nut (11), and spring (12).
3.
Install assembly (3) to the engine block and install screw (8).
4.
Connect springs (4,5) to handle (6) and lever (7).
5.
Install screw (1) and washer (2).
END OF WORK PACKAGE
0126 00-2
