TM 3-4230-204-12&P
(5) Push in on handle locking pin and lower the handle.
(6) Install full nitrogen cylinder into slot and slide neck
into hole. DO NOT force cylinder down or you may
puncture the cylinder. Lower thumb lever. Be sure
the nozzle is pointing away from you and all
personnel.
(7) Replace sealing wire. (See page 2-7.)
(8) Reinstall M11 DECON in the bracket and secure.
d. Wash dirt and any remaining DS2 from outer surfaces.
e. Turn in M11 DECON to unit maintenance for cleaning
Inside of container is not clean.
the inside of container.
2
Bracket
a. Be sure the bracket is secured and not broken or rusty.
Bracket will not hold M11 DECON securely.
b. Check that spare nitrogen cylinder is in place.
If not, get a replacement nitrogen cylinder.
2-3
