TM 3-4230-204-12&P
4-7.
DECONTAMINATING APPARATUS, ABC-M11 (CONT).
INSPECTION/REPAIR I
a. Inspect identification plate. Replace if unreadable or loose.
b. Inspect inside of container for rust. Rust discoloration is not reason to replace container. Clean container when rust is flaking. Replace container if rust
is severe enough to break loose and block the strainer screen.
c. Inspect bracket and outside of container for corrosion, rust, and chipped or marred paint. Remove the corrosion and paint as needed in accordance with
TM 43-0139.
d. Apply a light coat of silicone compound to all threads in the container, on the spray head assembly, and on the O-ring just above the threads on spray
head assembly before installation.
REASSEMBLY
Replace any unserviceable authorized component.
Reassemble in
numerical order from 1 to 11.
LEGEND
1. Bracket
2. Hexagon head cap screws (3 ea)
3. Lock washers (3 ea)
4. Hexagon plain nuts (3 ea)
5. Container
6. Identification plate
7. Copper flat washer
8. Steel machine bolt
9. Spray head assembly
10. Nitrogen cylinder
11. Sealing wire
4-18
