TM 3-4230-209-10
Item
Location, Item to
Not Fully Mission
No.
Interval
Check/Service
Procedure
Capable If:
BEFORE
d. Check that fuel filter is clean
Fuel filter is
and does not leak.
dirty or leaks.
(1) Tighten FUEL SHUT
OFF valve (3) to shut off
fuel line. Close finger
nut (4) at top of
sediment bowl (8).
(2) Loosen thumbscrew (5)
on fuel filter (6), swing
bail (7) to one side, and
remove sediment bowl
(8).
(3) Remove deposits from
sediment bowl (8) and
clean filter.
(4) Inspect gasket (9).
Gasket is
missing.
(5) Set sediment bowl (8)
with gasket filter in bail
(7) and tighten
thumbscrew (5). Open
finger nut at top of
sediment bowl. Loosen
FUEL SHUT OFF valve
to allow fuel to go
through fuel filter (6).
Make sure sediment
Sediment bowl
bowl (8) does not leak.
leaks.
BEFORE
e. Check that FUEL SHUT OFF
Fuel shutoff
valve and fuel hoses do not
valve or fuel
leak. Tighten hose clamp if
hoses leak.
necessary.
Change 2 2-31
