TM 3-4230-209-10
Item
Location, Item to
Not Fully Mission
No.
Interval
Check/Service
Procedure
Capable If:
18
QUARTERLY
Frame
a. Inspect for missing hardware
Assembly
or parts.
QUARTERLY
b. Inspect for broken welds or
dents.
QUARTERLY
c. Wash with hot soapy water.
Rinse with clear water.
Remove any rust and
corrosion with a wire brush
(item 5, app D). Repaint
(item 21, app D) as
necessary.
19
QUARTERLY
Skid Base
Inspect for rust, corrosion,
Subassembly
welds, dents, or loose
hardware.
20
BEFORE
Drive Belts
Check pump and alternator/
One or more
generator drive belts for wear,
belts broken or
breaks, or fraying. Check for
missing.
proper tension: 5-7 lbs at 3/8-
Tension
inch deflection. Adjust if
incorrect and
necessary (para 3-7).
no adjustment
remaining.
Change 2 2-37
