TM 3-4230-209-10
4
WARNING
If it is necessary to disconnect
the hoses with the water temper-
ature above 100 F (38 C), exer-
cise extreme care to prevent
scalding.
a. Disconnect the blender hose from the
heater base and make the appropriate
connections for the next operation. For
shutdown, coil water hose neatly in stor-
age compartment. Allow the water
heater to drain. It will drain completely
through the water inlet.
b. Install protective cap on heater inlet.
c. Close and latch storage compartment door (1).
2-19. HEATING WATER DRAWN FROM A NATURAL SOURCE.
NOTE
If the tank cannot be filled prior to heating water, water from a natural
source can be heated by pumping it directly through the heater.
Follow operation number 7 on the STARTING PROCEDURE instruction plate.
2-87
