(4)
(5)
(6)
TM 3-4230-218-12&P
Loosen two bolts (9) and remove upper engine shipping retainer
(8). (Retainer is red in color.)
Remove two bolts (18), two washers (17) , and two washers
(16).
Pry up on engine mounting bracket and remove lower
engine restraints (14 and 15).
Remove tape from heat exchanger outlet (7), water inlet (19),
carburetor filter (10), water outlet (12), air vent (13), and
water pressure relief valve (11).
WARNING
The cleaning solvent used emits strong vapors and is flammable. To avoid ill-
ness or fire,
use in a well-ventilated area and away from open flames. DO
NOT breathe vapors for a prolonged time.
(7) Using cleaning solvent (item 3, Appendix E), remove tape resi-
due from all surfaces.
(8) Install water pump belts and fuel pump belt. (Refer to page
4-18).
Restraint, Removal.
4-3
