TM 3-4230-218-12&P
3-11.
BRANCH HOSE STRAINER CLEANING.
a.
Introduction.
This paragraph contains instructions for cleaning the branch hose
strainer.
NOTE
If at any time you detect any particles in,or a slight coating of scale on
strainer,
b.
you may be in a
Cleaning.
(1)
(2)
(3)
(4)
(5)
Loosen and
element (3).
high scale deposit environment.
remove cap (1) from housing (4). Remove strainer
Inspect gasket (2) for damage, but do not remove
unless defective.
If strainer element is coated or clogged replace with element
provided in accessory kit.
Clean dirty element with brushes
from accessory kit.
If strainer element cannot be cleaned,
refer to organizational maintenance.
Install strainer element (3) in housing (4).
If removed, install new gasket (2) on cap (1).
Install cap (1).
Branch Hose Strainer, Cleaning.
3-23/(3-24 Blank)
