2-7.
TM 3-4230-218-12&P
e.
During
injector
D u r i n g
Injector Connection.
NOTE
operation of injector,
the pressure hose must be connected from the
directly to the water outlet.
(1) Connect end of
Be sure gasket
of the pressure
coupling.
(2) Secure in place
pressure hose (2) to coupling on injector (5).
is properly seated.
Be sure the opposite end
hose is hooked directly to the water outlet
by turning the brass ring (4) clockwise.
(3) Insert other end of injector hose (1) into 32 gallon can (3)
filled with cleaning solution to be used.
NOTE
operation,
the clear hose may partially collapse.
Try to support the
clear hose as much as possible to prevent collapsing.
. -
(4) Turn control valve handle (6) parallel to clear hose to draw
cleaning solution from container.
(5) Upon completion of decontamination procedure, remove end of
clear tubing (2) from cleaning solution container
in
pail of water (Appendix D).
(6)
Turn control valve handle ( 6 ) to initiate flow of
assembly of cleaning solution.
(3) and place
water to purge
Injector Connection.
2-18
