TM 3-4230-218-30&P
(d)
(e)
( f)
Install key (11).
Install drive pulley (8).
Install bolt (10) and washer (9).
(g) Place a straight edge against face of drive pulley (8) and
engine drive pulley (15) as shown.
Adjust position of
water inlet assembly (14) so that drive pulley (8) and
engine drive pulley (15) are alined.
Correct alinement is
obtained when the faces of both pulleys are flush against
the straight edge.
Tighten four bolts (12).
2-17
