TM 5-3800-205-10-2
EXTERNAL AIR TRANSPORT BY CH-47 HELICOPTER - CONTINUED
0016 00
MACHINE DISASSEMBLY AND SECTIONALIZATION - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure any lifting device used is in good condition and of suitable lift capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may result in death or injury to person-
nel.
31.
Remove right fender from tractor and set aside for stowage in ISU-60 container:
a.
Remove six bolts and washers from fender and frame bracket.
b.
Remove an additional 11 bolts and washers and remove fender.
c.
Reinstall mounting hardware on machine.
FRAME
BRACKET
RIGHT FENDER
BOLTS
AND WASHERS
FRAME
390-1090
32.
Remove left fender from tractor and set aside for stowage in ISU-60 container:
a.
Remove six bolts and washers holding fender to frame bracket.
b.
Attach lifting sling through slotted opening in welded bracket of fender and attach sling to overhead lifting device.
Take up slack in sling.
NOTE
Weatherseal at front of fender will remain with fender.
c.
Remove 12 bolts, washers, and fender from tractor.
d.
Reinstall mounting hardware on machine.
0016 00-30
