TM 5-3800-205-10-2
EXTERNAL AIR TRANSPORT BY CH-47 HELICOPTER - CONTINUED
0016 00
MACHINE ASSEMBLY - CONTINUED
NOTE
All quick disconnect connections (air, fuel, and hydraulic) are made the same way. Be sure to turn quick dis-
connect collar a half turn after connecting to lock connection.
c.
Remove dust cap from air chuck quick disconnect and connect control panel air hose quick disconnect. Turn quick
disconnect collar a half turn after connecting to lock connection.
d.
Remove dust cap and connect control panel electrical cable to connector at right-rear corner, outside cab.
e.
Secure control panel electrical harness/air hoses bundle to hitch and draft frame with four straps. Ensure bundle is
fully supported, is not kinked, and does not interfere with hitch articulation.
CONTROL
PANEL
AIR HOSES
BUNDLE
CONTROL PANEL
AIR HOSE QUICK
DISCONNECT
CONTROL PANEL
ELECTRICAL CABLE
AIR CHUCK
QUICK
DISCONNECT
CONNECTOR
DUST CAP
PIN
POST
NOTE
As soon as electrical connections are made, skid steering is disabled and conventional steering is enabled.
21.
Disconnect two 12-pin electrical connectors on right side of draft frame from each other.
TWO 12-PIN
CONNECTORS
390-1974
0016 00-51
