TM 5-3800-205-10-2
EXTERNAL AIR TRANSPORT BY CH-47 HELICOPTER - CONTINUED
0016 00
MACHINE ASSEMBLY - CONTINUED
22.
Reposition wiring harness at right side of draft frame.
23.
Connect two 12-pin electrical connectors to other two connectors, as shown. Secure connectors to clip on draft frame.
12-PIN CONNECTORS
WIRING
HARNESS
12-PIN
CONNECTORS
CLIP
390-1973
WARNING
DO NOT perform fuel system maintenance while smoking or near fire, flames or sparks. Auxiliary fuel tank
should be stored EMPTY. Fuel may ignite, causing damage to machine and injury or death to personnel.
24.
Remove auxiliary fuel tank, ratchet straps, and fuel lines and set aside for stowage in ISU-60 container:
a.
Disconnect fuel jumper hose assembly from fuel hose quick disconnects on right side of draft frame. Connect fuel
hoses at quick disconnect fittings. Turn quick disconnect collars a half turn after connecting to ensure connection is
locked. Install all dust caps.
b.
Stow fuel jumper hose assembly in ISU-60 container toolbox.
0016 00-52
