TM 5-3800-205-10-2
AIR TRANSPORT BY C-130 AIRCRAFT - CONTINUED
0017 00
CONFIGURE MACHINE FOR AIR TRANSPORT - CONTINUED
b.
Place both handrails on hangers at front of tank.
c.
Secure handrails with strap.
HANGERS
HANDRAILS
STRAP
390-1964
WARNING
Hitch and steering movement can reduce clearances suddenly and cause personnel injury. Always stop
engine BEFORE working in area of hitch link.
21.
Install one each long (10 3/4 in.) steering cylinder locking collar to rod end of each steering cylinder:
a.
Disassemble each locking collar assembly: remove three bolts and washers, open locking collar, and remove hose
wrapping.
CAUTION
To prevent damage to cylinder rod, ensure rod surface is free of dirt or other debris before locking collars are
installed.
b.
Position hose wrapping and long (10 3/4 in.) locking collar around rod end of each steering cylinder.
c.
Install three washers and bolts to each long locking collar. Tighten bolts evenly and securely.
d.
Place two remaining short (6 5/8 in.) locking collars in cab. They will be installed just prior to driving into aircraft.
0017 00-20
