TM 5-3800-205-10-2
AIR TRANSPORT BY C-130 AIRCRAFT - CONTINUED
0017 00
CONFIGURE MACHINE FOR AIR TRANSPORT - CONTINUED
24.
Remove turnbuckles:
a.
Place transmission in N (Neutral) and lock. Apply parking brake.
b.
Shut down engine.
c.
Remove cotter pin and pin from each load transfer axle and turnbuckle.
d.
Remove cotter pin and pin from other end and remove each turnbuckle from front corner of tank.
e.
Operate hydraulics to lower load transfer axle wheels and cutting edge wheels to the ground.
WARNING
Hitch and steering movement can reduce clearances suddenly and cause personnel injury. Always stop
engine BEFORE working in area of hitch link.
25.
Install two remaining short (6 5/8 in.) steering cylinder locking collars, one to each steering cylinder:
a.
Disassemble each locking collar assembly: remove two bolts and washers, open locking collar, and remove hose
wrapping.
CAUTION
To prevent damage to cylinder rod, ensure rod surface is free of dirt or other debris before locking collars are
installed.
b.
Position hose wrapping and short (6 5/8 in.) locking collar around rod end of each steering cylinder.
c.
Install two washers and bolts to secure each locking collar. Tighten bolts evenly and securely.
SHORT LOCKING COLLAR
TWO BOLTS
AND WASHERS
HOSE
WRAPPING
390-1033
0017 00-23
