TM 5-3800-205-10-2
AIRDROP BY C-130 AIRCRAFT - CONTINUED
0018 00
CONFIGURE MACHINE FOR AIRDROP - CONTINUED
c.
Remove locknut, washer, and two plastic bushings. Separate arm from arm mount on each side of windshield and
remove windshield.
LOCKNUT, WASHER,
AND TWO PLASTIC
ARM
ARM MOUNT
BUSHINGS
WINDSHIELD
390-1067
d.
Reinstall bolts, washers, and nuts to windshield hinge. Reinstall two plastic bushings, washer, and locknut on each
arm.
7.
Stow windshield in ISU-60 container:
a.
Open single-door end of container.
b.
Remove two roller ramps from right-side wall of container.
c.
Install each ramp at door opening, with two pins through each ramp into holes in edge of container floor.
0018 00-7
